About the raw materials of stainless steel shot

Stainless steel wire is also known as stainless wire. It is made of various specifications and types of silk products which is made of stainless steel. Common stainless steel wire (SUS410, SUS430,SUS201...) with good corrosion resistance and high cost performance is 304 and 316 stainless steel wire.

Generally, the austenitic, ferrite, bidirectional stainless steel and martensitic stainless steel are mainly divided into 2 series, 3 series, 4 series, 5 series and 6 series stainless steel.

316 and 317 stainless steel (the performance of 317 stainless steel) is of molybdenum stainless steel. The molybdenum content of 317 stainless steel was a little bit clever than 316 stainless steel. Because of molybdenum in steel, stainless steel, the steel grade overall performance is better than 310 and 304, under the condition of high temperature when the concentration of sulfuric acid is less than 15% and higher than 85%, the 316 stainless steel has a wide range of USES.316 stainless steel also has good resistance to chloride corrosion, so it is usually used in Marine environment. The maximum carbon content of 316L stainless steel is 0.03, which can not be used for annealing after welding and the use of maximum corrosion resistance.

We usually use the SS410,SS430,SS304 to produce high performance stainless steel shot and cut wire shot, they have very good strength and good fatigue life.

For more information, please visit our website: