TEL：86-13952600153
CARBON STEEL SHOT AS CUT HRC55-60
CARBON STEEL SHOT AS CUT HRC55-60
High carbon steel shot also called reinforced steel shot, its toughness and impact resistanceis is stronger, not easy to break and have a long life, lower consumption when use.
Strengthened steel shot can bring higher quality of shot blasting cleaning effect and significantly improve cleaning efficiency. Taking conventional spring cleaning and gear cleaning as examples, the efficiency of steel shot cleaning can be increased by more than 50% compared with ordinary high carbon steel shot cleaning.
High carbon steel shot technical specification
| Material | SIZES | CUT WIRE SHOT | VICKERS HARDNESS RANGE | ROCKWELL HARDNESS RANGE |
|---|---|---|---|---|
| Steel |
0.10 mm - 1.60 mm (.0039 inch - .062 inch) |
Low Carbon Cut wire shot High carbon Cut wire shot |
< 35 Rc 45 - 55 Rc 55 - 62 Rc |
< 350 HV 446 - 595 HV 595 - 697 HV |
| Stainless Steel |
0.45 mm - 1.60 mm (.017 inch - .062 inch) |
Grade 410/430/304 Cut Wire shot |
Min. 45 Rc Min. 35 Rc |
Min. 446 HV Min. 350 HV |
| Aluminum |
0.50 mm - 2.00 mm (.020 inch - .080 inch) |
Grade 5056/5053 Cut Wire Shot - Full Hard Grade 1070 Cut Wire Shot - Full Hard |
SOFT | N/A |
| Zinc |
0.61 mm - 3.35 mm (.024 inch - .1319 inch) |
Commercial Quality Pure Zinc Cut Wire shot |
SOFT | N/A |
