Products |
Stainless steel shot |
Stainless steel cut wire shot |
Chemical composition |
304 Austenite Type: C<0.15% ; Cr=16-18% ; Ni=6-10% ; Si<1% ; Mn<2%
|
|
430 Ferrite Type: C<0.15% ; Cr=16-18% ; Si<1% ; Mn<1% |
||
410 Martensite Type: C<0.15% ; Cr=11-13% ; Si<1% ; Mn<1% |
||
Hardness |
308-509HV |
|
Tensile Intensity |
490-1520Mpa |
|
Durability |
6500 times(1.0mm,VDFI8001) |
7000 times(1.0mm,VDFI8001) |
Microstructure |
304 type: Deformed Austenite |
|
430 type:Deformed Ferrite |
||
410 type:Deformed Ferrite |
||
Density |
7.8g/cm3 |
|
Bulk Density |
4.5g/cm3 |