TEL:86-13952600153
304 STAINLESS STEEL SHOT BLAST MEDIA 0.3-1.0MM


SUS304 STAINLESS STEEL SHOT BLAST MEDIA

Size range: 0.3mm-3.0mm



Introduction of stainless steel shots:

Stainless Steel shot is a kind of commonly used metal work piece processing materials, by using stainless steel shot to treat the appearance of metal work piece can add the effect of metal work piece appearance pressure, can greatly improve the anti-fatigue ability of the work piece.Steel cut wire shot manufacturer Taizhou Teliday is introduced by using steel shot appearance with finishing processing metal work piece speed characteristics, they have proper hardness, good elasticity, internal Angle and complex shape work piece can be uniform, shorten the processing time of appearance, improve work efficiency, processing materials is an excellent appearance.
 
Stainless steel cut wire shot is widely used, such as castings, forgings and machined parts after the appearance of the department and parts after thermal treatment of the department and other categories. Steel pellets are used in normal manufacturing operations, ship building, etc.


Stainless steel cut wire shot technical datasheet: 


Stainless steel shot and stainless steel cut wire
Material Chemical composition (%)
C Si Mn Ni Cr
SUS410 <0.08 1.5-2.0 0.9-1.2 8.0-10.0 11.0-13.0
SUS430 <0.12 0.5-1.2 0.8-1.2 0.1-0.5 16.0-18.0
SUS304 <0.15 1.5-2.0 8.0-10.5 1.0-3.0 16.0-18.0

 

 




 
TEL
86-13952600153