TEL:86-13952600153
STONE SHOT BLASTING ABRASIVES


Taizhou Teliday Stone Shot Blasting Abrasives/Stainless steel cut wire shot for stone finishing

(1) the production process is environmentally friendly and energy-saving. The latest shot blasting technology using steel shot replaces the previous quartz sandblasting, and the dust volume has been reduced to the lowest level. Stainless steel pellets can be recycled for reuse;

(2) shot blasting technology for stone surface treatment by steel shot is mainly made of nickel-cadmium alloy, so it will not cause rust spots on stone surface caused by ordinary steel shot;

(3) we could choose steel pellets in variou grit sizes, the grit size will determine the surface roughness of stone;

(4) high efficiency by stainless steel shot blasting;

(5) low production cost.
 

Chemicals(%) Type C Cr Ni Mn Mo
201 Austenite ≤0.15 16.00-18.00 3.5-5.5 5.50-7.50  
202 Austenite ≤0.15 17.00-19.00 4.0-6.0 7.50-10.0  
Tensile Strength 1300-2200Mpa
Durability 7000 TIMES
Micro Hardness 308-509HV
32-50HRC
 Deviation Max Deviation ±3.0HRC
Density 7.8g/m³
Bulk Density 4.5g/m³
 
 


TEL
86-13952600153