TEL:86-13952600153
STEEL CUT WIRE SHOT 1.5MM/2.0MM


Steel Cut Wire Shot is the media of choice for peening, cleaning, tumbling, and vibratory finishing. It is widely used in wheel blast equipment. Available in the alloys shown above (and in others – note that if a metal can be drawn into wire, Pellets can cut it into shot or pins), our product can be purchased as-cut (cylindrical with sharp edges) or conditioned (rounded to a sphere)

The size of Steel Cut Wire Shot : CW1.0mm,CW1.2mm,CW1.5mm,CW2.0mm,CW2.5mm, CW3.0mm

   
Products
Steel Cut Wire Shot
Chemical Composition
C
0.45~0.75%
Mn
0.40~1.20%
Si
0.10~0.30%
S
<0.04%
P
<0.04%
        Hardness
1.0mm: 51-53HRC(525-561HV)
1.5mm: 41-45HRC(388-436HV)
Hardness Deviation
Max Deviation ±1.0HRC or ±40HV
Tensile Intensity
1.0mm:1750~2150 Mpa
1.5mm:1250~1450 Mpa
Microstructure
Portrait 
Landscape even deformed perlite
Density
7.8g/cm3

 


TEL
86-13952600153